Suction Brush Unit
Replacement Brush Series
Heat-Resistant Brush 25
Heat-Resistant & High-Durability Design
High-Durability Cleaning Model
This brush is a replacement brush designed exclusively for the Suction Brush Unit.
共通
25mm
Features
• Heat-resistant design suitable for
cleaning with hot water
• Bristles resist spreading and offer
excellent durability
• Suitable for cleaning narrow
and detailed areas
• Versatile for window tracks, fixtures,
vehicle interiors, and more
• Recommended model in the
Sucking Brush series
• If you are unsure which brush to choose,
start with this one
This is an example of long-term use in professional house cleaning.
Top image
Condition after approximately 1 year of use
Bottom image
3 months later
(after 1 year and 3 months of use)
Features 2
🔥 Suitable for use with hot-water cleaning,
acidic cleaners, and strong alkaline cleaners.
🧪 PBT bristles provide excellent
heat resistance, chemical resistance,
and durability.
💡 The Heat-Resistant Brush 25
and Heat-Resistant Brush Step-Cut
use the same PBT bristle material.
💡 Wear rate varies
depending on usage conditions.
• Compatible with the common Head Joiner
used across the Sucking Brush series
Hard Type
Angled inward bristles designed to fit into grooves.
A versatile design for use in a variety of areas.
Designed to reach easily into window tracks and other grooves.
The bristles angle inward, while conventional bristles are generally straight or angled slightly outward.
Brush Head Structure
Photo shows the Heat-Resistant Brush 25
Bristle tips designed to contact the surface
The brush is designed so that the bristle tips make direct contact with the surface.
Because the bristles extend forward beyond the brush body, the body is less likely to hit the surface, making it easier to work in narrow spaces.
(Common design for all Brush Heads)
Recommended Uses
• Window tracks
• Sliding door tracks
• Bathroom cleaning
• Vehicle interiors
• Kitchen and cooking areas
• HVAC and air-conditioning components
• Cleaning with hot water
• RV and camper interiors
A heat-resistance test was conducted
using hot water from an electric kettle.
The bristles are made of PBT,
and the brush body is made of PP virgin resin,
making it suitable for hot-water cleaning.
The rate of deterioration may vary
depending on usage conditions.
Click to play the video automatically.
Example of Use
ソフトブラシと組み合わせた場合
片側のソフトブラシで洗剤を塗布し、
片側の耐熱ブラシ25で
ブラッシング。
用途に応じて異なるブラシを
1本のツールで使い分けることが
できます。
ブラシ交換の手間を減らし、
作業効率を向上させます。
用途に合わせて自由に
組み合わせてください。
Combination Example
Specifications
Head Material: PP
• Bristle Material: PBT
• Bristle Length: 25 mm Bristle Diameter: 0.4 mm
• Heat Resistance Test: Conducted at approx. 100°C (212°F)
• Compatible Parts: Handle,
Head Joiner
About PBT Bristles
• PBT bristles offer excellent heat
and chemical resistance.
• Resistant to acidic and alkaline cleaners.
• Low water absorption helps the bristles
dry quickly.
• Strong bristles provide firm contact
for effective cleaning.
• Suitable for cleaning with hot water.
Dimensions
70mm
60mm
Overall Dimensions: Approx. 70 × 65 mm
How to Connect (Common to All Brush Heads)
Connection
Align the Brush Head and Head Joiner in the correct direction.
Insert the Brush Head until it passes beyond the locking tab.
Locking Mechanism
The Brush Head and Head Joiner are securely held in place by the locking mechanism.
Insert the Head Joiner into the Handle.
The hexagonal shape ensures a secure connection.
Insert the Head Joiner fully and securely.
Make sure there is no gap between the Head Joiner and the Handle.
If the connection is incomplete, the part may come off during use.
Connection Complete
Removal
Press the locking tab while removing the Brush Head.
No tools are required.
Angle Adjustment
The Brush Head can rotate.
Adjust the angle to suit the area being cleaned.
There is no need to press the locking tab.
Useful Signboard Card for Cleaning Sites
After use, the backing card can be reused as a simple signboard.
It can be used to provide information or notices while working on site.
Go to Purchase Page
Product Specifications
-
1 Replacement Brush Head
-
Replacement part exclusively for the Suction Brush Unit
-
Not a suction-type brush
-
Made in Japan
For customers who do not have the Basic Unit,
set products for first-time buyers are also available. ▶ View Set Products
Please Check Before Purchase
-
This product is a replacement Brush Head.
-
Handle, Head Joiner, and hose are not included.
-
This product does not have a suction function (it is not a suction-type brush).
-
Brush color may vary slightly depending on the production lot.
-
Package design may change without notice.
-
Product performance and specifications are subject to change.
International Shipping
International shipping is currently being prepared.