Suction Brush Unit
Replacement Brush Series
Heat-Resistant Brush
Step-Cut
Heat-Resistant & Highly Durable
Heat-Resistant Corner-Cleaning Model
This brush is a replacement brush designed exclusively for the Suction Brush Unit.
25mm
30mm
Features
• PBT bristles provide excellent
heat resistance, chemical resistance,
and durability.
• The step-cut design helps the bristles
fit into grooves and corners.
• Different bristle lengths help
remove dirt efficiently from recesses
and stepped areas.
• Angled bristles are designed
to reach into grooves
and narrow spaces.
This is an example of long-term use in professional house cleaning.
Top image
Condition after approximately 1 year of use
Bottom image
3 months later
(after 1 year and 3 months of use)
The photo shows the Heat-Resistant Brush 25.
The Heat-Resistant Brush Step-Cut uses the same PBT bristle material.
Features 2
🔥 Suitable for use with hot-water cleaning,
acidic cleaners, and strong alkaline cleaners.
🧪 PBT bristles provide excellent
heat resistance, chemical resistance,
and durability.
💡 The Heat-Resistant Brush 25
and Heat-Resistant Brush Step-Cut
use the same PBT bristle material.
💡 Wear rate varies
depending on usage conditions.
• Compatible with the common Head Joiner
used across the Sucking Brush series
*Photos (below) 1, 2, and 4 show the heat-resistant brush 25.
The brush on this page also uses the same angled bristle structure.
Photo 1
Hard Type
Angled inward bristles designed to fit into grooves.
A versatile design for use in a variety of areas.
Designed to reach easily into window tracks and other grooves.
The bristles angle inward, while conventional bristles are generally straight or angled slightly outward.
Photo 2
Photo 3
Suitable for cleaning corners.
Photo shows the Heat-Resistant Brush 25
Bristle tips designed to contact the surface
The brush is designed so that the bristle tips make direct contact with the surface.
Because the bristles extend forward beyond the brush body, the body is less likely to hit the surface, making it easier to work in narrow spaces.
(Common design for all Brush Heads)
Brush Head Structure
Recommended Uses
• Window tracks
• Kitchen and cooking areas
• HVAC and air-conditioning components
• Cleaning with hot water
• Shower door tracks
• Sliding door tracks
• Corners and narrow gaps
• Detail cleaning in hard-to-reach areas
• RV and camper window and door tracks
A heat-resistance test was conducted
using hot water from an electric kettle.
The bristles are made of PBT,
and the brush body is made of PP virgin resin,
making it suitable for hot-water cleaning.
The rate of deterioration may vary
depending on usage conditions.
Click to play the video automatically.
Example of Use
When used in combination with a soft brush
A soft brush on one side,
A heat-resistant brush with a stepped cut can be attached to one side.
Apply detergent and clean the details.
It can be done with a single tool.
Reduce the hassle of changing brushes,
It improves work efficiency.
Depending on the purpose
Please feel free to combine them as you like.
Combination Example
Specifications
Head Material: PP
• Bristle Material: PBT
• Bristle Length: 25 mm + 30 mm at the tip
Bristle Diameter: 0.4 mm
• Heat Resistance Test: Conducted at approx. 100°C (212°F)
• Compatible Parts: Handle
Head Joiner
About PBT Bristles
• PBT bristles offer excellent heat
and chemical resistance.
• Resistant to acidic and alkaline cleaners.
• Low water absorption helps the bristles
dry quickly.
• Strong bristles provide firm contact
for effective cleaning.
• Suitable for cleaning with hot water.
Dimensions
70mm
65mm
Overall Dimensions: Approx. 70 × 65 mm
How to Connect (Common to All Brush Heads)
Connection
Align the Brush Head and Head Joiner in the correct direction.
Insert the Brush Head until it passes beyond the locking tab.
Locking Mechanism
The Brush Head and Head Joiner are securely held in place by the locking mechanism.
Insert the Head Joiner into the Handle.
The hexagonal shape ensures a secure connection.
Insert the Head Joiner fully and securely.
Make sure there is no gap between the Head Joiner and the Handle.
If the connection is incomplete, the part may come off during use.
Connection Complete
Removal
Press the locking tab while removing the Brush Head.
No tools are required.
Angle Adjustment
The Brush Head can rotate.
Adjust the angle to suit the area being cleaned.
There is no need to press the locking tab.
Useful Signboard Card for Cleaning Sites
After use, the backing card can be reused as a simple signboard.
It can be used to provide information or notices while working on site.
Go to Purchase Page
Product Specifications
-
1 Replacement Brush Head
-
Replacement part exclusively for the Suction Brush Unit
-
Not a suction-type brush
-
Made in Japan
For customers who do not have the Basic Unit,
set products for first-time buyers are also available. ▶ View Set Products
Please Check Before Purchase
-
This product is a replacement Brush Head.
-
Handle, Head Joiner, and hose are not included.
-
This product does not have a suction function (it is not a suction-type brush).
-
Brush color may vary slightly depending on the production lot.
-
Package design may change without notice.
-
Product performance and specifications are subject to change.
International Shipping
International shipping is currently being prepared.